| Refrigeration operation |
Rated cooling capacity T1 35 ° C *1/kW |
8.0 |
| |
kBtu/h |
27.3 |
| |
Rated cooling capacity T3 46 ° C *1/kW |
6.8 |
| |
kBtu/h |
23.2 |
| |
Rated cooling power T1 35 ° C/kW |
2.02 |
| |
Rated cooling power T3 46 ° C/kW |
2.54 |
| |
EER T1 35ºC W/W |
3.45 |
| |
EER T3 46ºC W/W |
2.55 |
Low noise mode Temp Change Curve 8hrs 16:00 9hrs*1 Night Mute Mode Min. 42dB(A) 20:00 15dB(A)*2 0:00 4:00 Noise Change Curve 8:00 Low noise mode can be set by operating the DIP in the PCB. There are multiple levels by set different frequencies of compressor and fan motor speed. What's more, the low noise mode can be achieved by external input signal. The noise can be reduced by up to 14dB(A).
To keep you comfortable and cozy as fast as possible, Hisense VRF starts supplying warm air so rapidly with only just 90s reaching a 100% capacity output. Besides, even in extreme whether condition like -15ºC outdoor temperature, Hisense VRF performance is tested with persisting capability to supply 40ºC or higher warm air within 7 minutes.Hisense VRF offers VIP mode to give priority to the specific room, keeping them comfortable and satisfied as fast as possible and 5 indoor units can be set as VIP mode at the same time. Such function is exclusively practical for hotel application, where AC unit in the presidential suite is often set to VIP mode
To keep up with the indoor quality requirements, Hisense VRF offers auto dehumidification function and it can be achieved by choosing a humidity sensor, and the control range is from 35% to 90%
New Hisense VRF indoor units are now infused with a fresh air duct opening for 10% free fresh air introductory directly from outdoor air, creating a comfortable and health environment.
Featured with self-cleaning technology, the evaporator can be self-cleaned automatically, preventing the dust and potentially harmful substances from accumulating on the surface of the heat exchanger. Thus the air blown from the air conditioner is clean and healthy
Low noise mode Temp Change Curve 8hrs 16:00 9hrs*1 Night Mute Mode Min. 42dB(A) 20:00 15dB(A)*2 0:00 4:00 Noise Change Curve 8:00 Low noise mode can be set by operating the DIP in the PCB. There are multiple levels by set different frequencies of compressor and fan motor speed. What's more, the low noise mode can be achieved by external input signal. The noise can be reduced by up to 14dB(A).
){kind=link}